This ME0708 is a Brush-Type, Permanent Magnet DC motor with very high efficiency. Capable of 4.8 KW continuous and 15 KW for 1 minute. For voltages from 12 to 48 VDC input and 100 amps continuous (300 amps for 1 minute). Designed for battery operated equipment. For more information, see the Performance Information section. Motor weight of 28 pounds. This motor is a direct replacement for the Briggs & Stratton Etek motor, which has been out of production since 2003. Runs a little faster than the Perm and Lynch or Lemco motors

1)  Armature Resistance Line to Line is 0.010 Ohms. 2)  The number of brushes is 8. 3)  The maximum recommended rotor speed is 5000 rpm. 4)  Voltages from 0 to 48 VDC input. 5)  Torque constant of 0.13 Nm per Amp 6)  The Inductance Phase to Phase is 0.06 Milli-Henry. 7)  Armature Inertia is 180 Kg Cm Squared. 8)  Continuous current of 100 Amps DC. 9)  Peak current of 300 Amps DC for 1 minute. 10)  Weight of 28 pounds. 11)  Peak Stall Torque if 38 Nm. 11)  This is an Open Frame, Fan Cooled motor.